Ribble Audax bar swap

I picked up this very lightly used Ribble a few weeks back . The previous owner claimed to have only used it for about 100 miles .

IMG_20190526_151833362

As you can see it had originally been built with flat bars and brifters that only allowed 12 of the 14 gears to be selected due to a mismatch of components , I tried to sort this but couldn’t find those extra pair of gears .

IMG_20190528_080735507

Whilst trying it out a couple of other issues became apparent , it’s front caliper Allen key bolt was only just reaching the caliper threads and the headset spacer arrangement wasn’t tensioning the headset bearings .

Once this pair of issues was sorted I decided to swap the flat bars for a set of drops. First job was to replace the original rear wheel and fit a new 8 speed cassette and a set of NOS Claris sti units .

IMG_20190719_054845395

I had initially fitted a riser stem but soon swapped that out for a flat one . and started to cable up the gears and brakes .

IMG_20190719_054837327

After a bit of setting up it was time for some test miles to see what it felt like . All was good so next job is to fit the matching fr wheel and to sort out the squeaky fr mudguard .

Then once I am happy with everything I can finish it off with some new bar tape .

 

Advertisements